How are stainless steel pipes classified?
Stainless steel pipes are divided into ordinary carbon steel pipes, high-quality carbon structural steel pipes, alloy structural pipes, alloy steel pipes, bearing steel pipes, stainless steel pipes, as well as bimetallic composite pipes, coated and coated pipes to save precious metals and meet special requirements. There are various types and uses of stainless steel pipes, with varying technical requirements and production methods. The current production of steel pipes has an outer diameter range of 0.1-450mm and a wall thickness range of 0.01-250mm. To distinguish its characteristics, steel pipes are usually classified according to the following method.
06
2023
/
03
How to determine the specifications of channel steel
The delivery length of channel steel can be divided into two types: fixed length and double length, and the tolerance value shall be specified in the corresponding standards. The length selection range of domestic channel steel is divided into three types based on different specifications: 5-12m, 5-19m, and 6-19m. The length selection range of imported channel steel is generally 6-15m.
16
2022
/
09
Preparation method of carbon steel pipe
The raw material of carbon steel pipe is round tube blank, which needs to be cut and processed by a cutting machine to form a billet with a length of about 1 meter, and then sent to the furnace for heating through a conveyor belt. The billet is fed into the furnace for heating, with a temperature of approximately 1200 degrees Celsius.
16
2022
/
09
What are the inspection standards for color coated rolls
Inspect the appearance of the color coated roll, including the smoothness, color, and absence of obvious scratches, dents, bubbles, foreign objects, etc. on the coating surface. The appearance requirements should meet the product specifications and relevant national standards.
16
2022
/
09
Four processes of steel bar processing
The processing of steel bars generally involves four processes: rust removal of steel bars; Straightening of steel bars; Steel bar cutting; Forming of steel bars.
When the steel bar joint is connected with straight or conical threads, it is also necessary to add the steel bar end upsetting and thread processing procedures. Rebar batching and replacement Rebar replacement
16
2022
/
09
CONTACT US
No.26-2 Xinglong Steel Market, East Shou, Liaohe Road, Liaocheng Economic and Technological Development Zone, Shandong Province
GET A FREE QUOTE
Copyright : Shandong Xintie Steel Co., Ltd. Powerby : 300.cn jinan2 SEO Privacy agreement
