Advantages of I-beams
Release time:
2023-03-14
I-shaped beams are hollow web members. For high-strength materials, hollow web members are better than solid web members in terms of weight, material, and labor saving. This cross-sectional design mainly uses the flange farthest from the centroid to resist bending moments (because the farther the flange is, the greater the moment of inertia), and mainly uses the web to resist shear. As for the inconvenience in making it, it can be solved by factory or molding. Saving materials, labor, and time is efficiency.
I-shaped beams are hollow web members. For high-strength materials, hollow web members are better than solid web members in terms of weight, material, and labor saving. This cross-sectional design mainly uses the flange farthest from the centroid to resist bending moments (because the farther the flange is, the greater the moment of inertia), and mainly uses the web to resist shear. As for the inconvenience in making it, it can be solved by factory or molding. Saving materials, labor, and time is efficiency.
Place a crossbeam horizontally on two supports, and when the crossbeam is subjected to downward pressure perpendicular to the axis, it bends. Compression deformation occurs at the upper part of the crossbeam, i.e. compressive stress occurs, and the closer it is to the upper edge, the more severe the compression is; Tensile deformation occurs at the lower part of the crossbeam, i.e. tensile stress occurs, and the closer it is to the lower edge, the more severe the tension becomes. And the middle layer is neither stretched nor compressed, so there is no stress. Due to the small contribution of the neutral layer to bending resistance, I-beams are often used in engineering applications to replace square beams and hollow pipes to replace solid columns.
LATEST NEWS
What is the material of carbon steel plate and what are its advantages and disadvantages
It is a type of steel with a carbon content lower than 2.11% and without intentionally adding metallic elements, and can also be called plain carbon steel or carbon steel. In addition to carbon, it also contains a small amount of elements such as silicon, manganese, sulfur, and phosphorus inside. The higher the carbon content, the better the hardness and strength, but the lower the plasticity.
2022-09-16
What is the difference between carbon steel and stainless steel
The density of carbon steel is slightly higher than that of ferritic and martensitic stainless steel, but it is lower for austenitic stainless steel, so the difference between carbon steel and stainless steel is different.
2022-09-16
What are the transportation methods of steel?
Land transportation refers to transportation by land transportation such as roads and railways. The vehicles commonly used in land transportation of steel are trucks and trains.
2023-10-18
Discount SPCC Carbon Steel Plate: The Best Choice for Your Steel Needs
Steel is an essential material commonly used in various industries due to its durability, strength, and versatility. One of the most commonly used types of steel is carbon steel, which is known for its cost-effectiveness and excellent mechanical properties. Among the several types of carbon steel, Discount SPCC Carbon steel plate has gained popularity among industries because of its excellent properties and cost-effectiveness.
2023-04-18
Characteristics of copper pipes
Lightweight, with good thermal conductivity and high low-temperature strength. Commonly used in the manufacturing of heat exchange equipment (such as condensers). It is also used for assembling low-temperature pipelines in oxygen production equipment. Copper pipes with small diameters are commonly used for conveying pressurized liquids (such as lubrication systems, oil pressure systems, etc.) and as pressure measuring pipes for instruments.
2023-03-24
I-shaped beams are hollow web members. For high-strength materials, hollow web members are better than solid web members in terms of weight, material, and labor saving. This cross-sectional design mainly uses the flange farthest from the centroid to resist bending moments (because the farther the flange is, the greater the moment of inertia), and mainly uses the web to resist shear. As for the inconvenience in making it, it can be solved by factory or molding. Saving materials, labor, and time is efficiency.
2023-03-14
CONTACT US
No.26-2 Xinglong Steel Market, East Shou, Liaohe Road, Liaocheng Economic and Technological Development Zone, Shandong Province
GET A FREE QUOTE
Copyright : Shandong Xintie Steel Co., Ltd. Powerby : 300.cn jinan2 SEO Privacy agreement
